What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
09.06.2025 02:14

A circuit breaker is similar, but is resettable.
Edit 2024–10.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
2024–10–14 [Omar Gharbi Omar Gharbi ]
Here is a simplified AC power diagram.
Mars’ Mysterious Dark Streaks Are NOT Caused by Water! Here’s the Real Story - The Daily Galaxy
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
so, what happens?
Why do I smell bad even though I have good hygiene?
One is “what exactly is in a ‘surge protector’ ? ”
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Why do some straight men enjoy wearing women's lingerie?
In schematic diagrams this is the symbol for a fuse:
The other is “what does a “fuse” do?”
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Mysterious sphere named Teleios found floating in the Milky Way - Earth.com
This is the picture of an electronic coil of wire wound around a core of magnetic material.
2024–10–16 [ OO OLAOYE OYEBODE ]
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
There’s a place where humans are evolving right before our eyes - Boy Genius Report
what exactly is a ‘surge’ protector?
The MOV will conduct when the voltage exceeds 50% of line voltage.
It also is a device that limits the change in current flow.
What would it take for you to consider yourself a "Swiftie" like Flavor Flav?
First Sentence:
It seems Mohan does not understand the difference between a comment and an Answer.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Diablo II: Resurrected Ladder Season 11 Coming Soon - Blizzard News
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
There are two important concepts here.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Procter & Gamble to Cut 7,000 Jobs - WSJ
I post the exact comment here.
Now when you have a certain ac resistance, then a current flows in a loop.
An AC voltage/ current source, and an ac inductive load.
So, the voltage could go up to 500 volts, and the fuse will not open up.
He then asserts :
What does a fuse do?
This one hit behind the barn.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Trump tariffs expected to dampen global economic growth, OECD says - The Washington Post
Because the load is inductive, the current lags the voltage.(by a bit).
The third is lightning and “how it gets conducted into a home.”
There are three different concepts here that are getting confused.
What is the best/cute/funny/playful chat/conversation between brother and sister?
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
But it can get overloaded, and no longer works.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
(Dc diagram shown, AC is similar).
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
But… the neutral is now “floating” because of the 1 ohm resistance.
This is where this question deviates from being a 'generic' question, and becomes more specific.
One
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
[image of Common-mode choke]
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
2024–10–10[John johnson John Johnson ]
This device then solves the entire problem.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
For this case there are devices called Metal oxide varistors (MOV).
He then describes the function of a fuse.
At least they know the answer if they wanted it.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
The bolt then partially travels down the line to your home.
A fuse is a non-resetable over current circuit protector.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
At one ohm, the resistor has a maximum of 1 watt power.
This is where the MOV conducts again, and dissipated the energy.
a photo is worth a thousand words.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Upvotes:
[old diagram got deleted by accident]
These devices are installed between the “hot” and “neutral” and protective ground.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
eight
These are simplified answers to the original question, and does not change anything I wrote above.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
the problem then depends on "how fast does the fuse operate?".
What is lightning?
This is 'the assistant's answer'
He then describes Rainy Season and Lightning.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
nine
but this device (an Inductor) … impedes the rapid changes in the current.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
but I think this circuit , shows a few more pieces.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Barnstars: